300mm Extended Water Blade with 1" threaded inlet

The Stowasis 300mm Extended Sheer Descent Water blade.  The 300mm stainless steel sheer descent creates an attractive blade of water flowing over the front lip.  Requires a 4000 lph pump.  Lights, hose kit & reservoirs also available.

Stainless Steel Extended Sheer Descent

The Extended Sheer Descent water blade can be used in many internal and external locations.

This extended water blade is made in stainless steel and has a brushed finish.  Available from 150 – 1500mm wide the sheer descents have one, two or three water inlets depending on blade width.

The blade has to be installed level to create an even flow of water across the width of the blade.  The flow of water reduces as the height of the water blade is increased – ensure the pump used has the right capacity for the desired height of the sheer descent.

The extended sheer descents have a rear entry inlet for the water – the pipework has to connect to the water blade from the pump situated in the reservoir.  The reservoir should be on a firm base with sufficient support around the sides and edges.

Available at extra cost an LED light strips added to the sheer descent gives a stunning effect as the water comes over the blade.  The light strip has 10 metre of cable and clips into the back of the feature.

Only use stainless steel fixings, brackets, hose clips when installing this feature.